AXIOMTEK AX93501 Manual de usuario descargar pdf (Pagina 9)

AX93501 User’s Manual

Hardware Reference

2.3 Hardware Installation

Please follow these steps to install the AX93501 card on the PCI

express bus:

1. Remove the computer cover using the instructions from the

computer manual.

2. Check that there is an empty PCI express slot. If there is not

an empty slot, remove a PCI express board from the

computer to make room for the AX93501 card and take note

of the chosen slot number.

3. Remove the blank metal plate located at the back of the

selected slot (if any). Keep the removed screw to fasten the

AX93501 card after installation.

4. Carefully position the AX93501 card in the selected PCI

express slot as illustrated below. If using a tower computer,

align the board with the board slots.

5. Press the board firmly, but carefully into the connector.

6. Anchor the board by replacing the screw.

7. Connect device via 1394b connector.

8. Turn on the computer.

NOTE The AX93501 can be installed in a PCI express x1, x4, x8,

and x16 slot.

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Sin comentarios

AXIOMTEK AX93501 Manual de usuario Pagina 9